Water Damage & Drying Concrete Slab in Belleview, Florida
What Happened
After removing the old flooring from a home in Belleview, Florida, the flooring company uncovered water on the slab that was trapped under the underlayment. Unbeknownst to the homeowner, water was slowly penetrating the vertical exterior walls via hairline fractures.
Both the cracks in the stucco and in the concrete slab itself were resolved, but the flooring company wanted the concrete slab moisture levels below a specific percentage.
What We Did
Florida tends to have elevated levels of humidity, including Belleview, Florida. To increase the drying efficiency, we sealed all the windows throughout the house with 4 mil plastic to prevent any moisture penetration. We placed a Phoenix DryMax XL Pro dehumidifier and a Dri-Eaz Stealth AV3000 axial air mover in each room. We also implemented the use of a heater to increase the internal temperature slowly to draw the moisture out of the concrete.
Beyond Boundaries
The axial air mover captures the dry air from the dehumidifier and forces it towards the concrete slab in a 360-degree pattern at the rate of 2,600 cubic feet per minute.
PUDDLES Restoration
Phone: (352) 722-3790
Email: Info@PUDDLESrestoration.com
Website: www.PUDDLESrestoration.com







